| BRAND | Hbm |
| Product | K-CAL-T-W-1-B-S-S-2-0 |
| Description | Calibration of the measured variable torque according HBM standard (Without connector or coupling assembly. Traceability through accreditation ISO 17025 (DKD) guarantees In DAkkS / DKD - calibrations optionally by: DIN 51309, EURAMET / cg-14, VDI2646 (Teilbereichskal. Not possible) DKD-R 3-5 (turning moment), or DKD-R 3-7 (transfer torque wrench). Factory calibrations (WCS) in relation to ISO 10012th Calibration certificate in German and English Calibration type torque WKS, 6 steps, 1 + 1 measurements Measuring range <= 200Nm Load direction right and left Moment Number outputs an output signal TEDS TEDS programming without programming 1. Signal output mV / V 2. Signal output 0 |
| Internal code | IMP320459 |
| Weight | 1 |
Discover the superior quality and performance of the Hbm K-CAL-T-W-1-B-S-S-2-0 with Impexron GMBH in South Africa . Whether you are looking for reliability or efficiency, this product meets all your industrial needs.
The K-CAL-T-W-1-B-S-S-2-0 is designed to provide optimal performance and durability in various applications. Known for its high-quality construction and innovative features, it is a preferred choice for professionals.
Key Features of K-CAL-T-W-1-B-S-S-2-0 :
At Impexron GMBH , we offer the K-CAL-T-W-1-B-S-S-2-0 at competitive prices and with the fastest delivery times across South Africa . Our expert team is ready to assist you with all your inquiries and provide tailored solutions to meet your specific needs.
Why Choose Impexron GMBH ?
Get Your Quote Today! Ready to enhance your operations with the K-CAL-T-W-1-B-S-S-2-0 ? Contact us now for a personalized quote. Fill out the form below or send us an email with your inquiry. Let us help you make a cost-effective, quality-driven choice for your business.
Important Notice: While we supply Hbm products, Impexron GMBH is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
Torque transducer, rated torque 20 NmMesssignalübertragung about SchleifringeDMS measurement system accuracy: 0.1Elektrischer connection via plug introduction of torque on shaft stub (friction) torque output signal 2mV / VNenndrehzahl 4000U / min
Torque reference sensor
Reference torque measuring disc, nominal torque 5 kNm DMS measuring system Accuracy class: 0.05 Permanently mounted connection cable 3m, with free ends Torque transmission via flange Torque output signal 1.5mV / V
displacement transducer
Mitutoyo Mark Magnetblock HBM can not be produced
(load cell Rated load: 50kg Minimum division value: 0.0090% of Emax OIML R60 test report Accuracy: C3 Measuring body: Stainless steel Protection: IP68 according to EN 60529 Cable: Shielded 6-wire round cable with PVC Cable length: 3m)
SUB-D-Stecker
compressive force transducer
Anschlussstecker
8-channel USB measurement amplifier espressoDAQFamilie
including programming the memory contents of the TEDS TEDS Aufnehmersteck module is mounted.
Type HLM-20242 Output 1.8 millivolts load cell
Emax: 2.2 t, Emin: 0 kg, Limit: 3.3 t Vmin: 220 g, Cn; 1.94 mv/v; TC2163
Load cell
(Calibration of the measured variable force in accordance with the HBM standard (without connector assembly). Traceability by DAkkS accreditation guaranteed by ISO 17025 or at factory calibrations (WCS) in Reference to ISO 10012 Calibration certificate in German and English Calibration type force DAkkS ISO 376, 8 steps Calibration power <= 1 MN Of load power tension and compression Number of measuring bridges Power Easy Bridge TEDS TEDS programming without programming)
Calibration of the measured variable torque according HBM standard (Without connector or coupling assembly. Traceability through accreditation ISO 17025 (DKD) guarantees In DAkkS / DKD - calibrations optionally by: DIN 51309, EURAMET / cg-14, VDI2646 (Teilbereichskal. Not possible) DKD-R 3-5 (turning moment), or DKD-R 3-7 (transfer torque wrench). Factory calibrations (WCS) in Terms of ISO 10,012th Calibration certificate in German and English Calibration type torque WKS, 6 steps, 1 + 1 measurements Measuring range <= 10kNm Load direction right and left Moment Number outputs an output signal TEDS TEDS programming without programming 1. Signal output mV / V
technology özllkler ksmnda blgi was
Absolute Pressure Measuring system: strain gauge 350 Ohm
(K-RTNaa / bbb cccc dd eee Compact RTN load cell as a variant in special design DMS-measuring system (4000 ohms), nominal characteristic value 2.85 mV / V, with fixed cable, free ends, IP68 protection to EN 60,529th design standard Accuracy class C3 Rated load 150t Explosion protection No explosion Cable length 12m Others without TK0 without Country / customer default Creep 20 ° C Standard)
3-way rosette 1.5, 350 OHM LUK / SENSOR / 3Set floors form
(K-U15 Force transducers for tensile and compression forces Class 0.5 to ISO 376 Class only guaranteed with the optionally available DKD calibration DMS-measuring system 350 Ohm Nominal sensitivity of 2 mV / V (2.5 kN ... 10 kN) Nominal characteristic value 3 mV / V (25 kN 1 ... MN) Nominal force 250kN Measuring bridge number Simple bridge Transducer identification TEDS without Inlet Protection without plug Protection Mating guide bridge A bayonet connector Parameter adjusted)
Process Controller
